03-08-2017 06:05 AM - edited 03-11-2019 12:31 AM
We recently upgraded from ISE 1.4 to 2.1 an applied Patch 3. We have a 2-Node Deployment. Since the upgrade, the dashboard metric for Active Endpoints and Authenticated Guests are blank showing zero. I have TAC case open, but was wondering if anyone else has ran into this issue.
03-13-2017 08:46 AM
check this bug details
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux68828/?referring_site=bugquickviewredir
03-13-2017 08:50 AM
Does not look like our same problem. The bug report says it's fixed in 2.1, which we are running and have the issue still.
Known Fixed Releases: |
(1)
|
03-21-2017 11:17 AM
We ran into the same issue. See CSCva56322.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCva56322/?referring_site=ss
Your may need to update your certs to include the IP address of the node in the SAN field.
03-21-2017 11:58 AM
03-21-2017 12:16 PM
We had to generate new admin certificates for each node in the deployment.
Admin-->Certificates-->System Certificates-->select your node-->generate self signed cert --> and then in the SAN field of the form put in the IP address of that node.
http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0111.html
I had run into that bug a few times. There has not been any issue since redoing the certs.
03-29-2017 07:34 PM
We just generated new certs, with the IP address in the SAN field but it did not resolve the issue. This was also the recommendation from TAC. Same issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide