ISE 2.3 Context Visibility issue.

[viv42]

I have a Cisco ISE 2.3 with no patch installed. Recently when I open the context visibility tab it gives me an error msg...

"Unable to load Context Visibility page. Ensure that reverse DNS lookup is configured for all Cisco ISE nodes in your distributed deployment in the DNS server(s). Exception: all shards failed"

I have checked the DNS PTR and it looks proper.

Context visibility was working before and suddenly it was giving the above error.

[Mark Elsen]

 - Check if this bug report could be informative : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw00375

 M.

[viv42]

Hi Marce,

I done the reload, now I am getting the below mentioned error while opening the contextvisibility.

Unable to load Context Visibility page. Ensure that full certificate chain of admin certificate is installed on Administration->System->Certificates->Trust
ed Certificates. If not, install them and restart application services. Exception: None of the configured nodes are available:

Thank you for your quick response..

[Charlie Moreton · Accepted solution]

Not only did version 2.3 have some issues with Context Visibility, Flash was used on various pages of that release.

Since 2.3 is no longer supported (since 2019) I suggest upgrading to a newer release.

Cisco Identity Services Engine Software Version 2.3 Product Bulletin 

[Rodrigo Diaz]

hello @viv42 , I would try to reset context visibility as the following document states https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-23/213610-ise-2-3-rest-sync-context-visibility.html, as others have said,  I would go to a newer version of ISE in case the reset context visibility doesn't work . 

Let me know if that helped you. 

[viv42]

Hi @Rodrigo Diaz, @Charlie Moreton 

Thank you for the provided solutions. I have decided to upgrade the ISE version.