cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
766
Views
0
Helpful
1
Replies

ISE 2.4 datatype mismatch

mcselltor
Level 1
Level 1

Hello,

 

I've just created some user custom attributes and wanted to add these attributes to a authorization profile. But for attribute #55 I receive an error message:

"Unable to edit Authorization Profile (xxx) : Datatypes are mismatching for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy(UINT32) and InternalUser:Split-Tunneling-Policy(INT)"

After https://communities.cisco.com/docs/DOC-67894#jive_content_id_CiscoVPN3000_and_ASA it should be Integer:

PIX7x-IPSec-Split-Tunneling-Policy 55 Integer 1.0

0 = No split tunneling

1 = Split tunneling

2 = Local LAN permitted

 

And after https://tools.ietf.org/html/rfc2865 is

integer   32 bit unsigned value, most significant octet first.

 

Which data type must be used in ISE 2.4 to solve this issue?

 

Thanks,

Torsten

 

1 Accepted Solution

Accepted Solutions

mcselltor
Level 1
Level 1

Hello,

 

now I've changed the data type for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy to INT and it works.

 

Thanks for your attention,

Torsten

View solution in original post

1 Reply 1

mcselltor
Level 1
Level 1

Hello,

 

now I've changed the data type for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy to INT and it works.

 

Thanks for your attention,

Torsten

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: