cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
878
Views
0
Helpful
1
Replies

ISE 2.4 datatype mismatch

mcselltor
Level 1
Level 1

Hello,

 

I've just created some user custom attributes and wanted to add these attributes to a authorization profile. But for attribute #55 I receive an error message:

"Unable to edit Authorization Profile (xxx) : Datatypes are mismatching for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy(UINT32) and InternalUser:Split-Tunneling-Policy(INT)"

After https://communities.cisco.com/docs/DOC-67894#jive_content_id_CiscoVPN3000_and_ASA it should be Integer:

PIX7x-IPSec-Split-Tunneling-Policy 55 Integer 1.0

0 = No split tunneling

1 = Split tunneling

2 = Local LAN permitted

 

And after https://tools.ietf.org/html/rfc2865 is

integer   32 bit unsigned value, most significant octet first.

 

Which data type must be used in ISE 2.4 to solve this issue?

 

Thanks,

Torsten

 

1 Accepted Solution

Accepted Solutions

mcselltor
Level 1
Level 1

Hello,

 

now I've changed the data type for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy to INT and it works.

 

Thanks for your attention,

Torsten

View solution in original post

1 Reply 1

mcselltor
Level 1
Level 1

Hello,

 

now I've changed the data type for Cisco-VPN3000:CVPN3000/ASA/PIX7x-IPSec-Split-Tunneling-Policy to INT and it works.

 

Thanks for your attention,

Torsten