02-06-2019 08:53 AM - edited 02-06-2019 08:55 AM
Hello Team,
Could you please help me understand the following note in the documentation
Note |
If the configured retention period is less than the existing retention thresholds corresponding to the diagnostics data, then the configured value overrides the existing threshold values. For ample, if you configure the retention period as 3 days and this value is less than the existing thresholds in the diagnostics tables (for example, a default of 5 days), then data is purged according to the value that you configure (3 days) in this page. |
Solved! Go to Solution.
02-11-2019 06:54 AM
AFAIK all of them are 5 days.
02-10-2019 03:36 PM
The thresholds of ISE diagnostic tables are hard-coded and ISE is not providing any option to configure them.
02-11-2019 04:23 AM
Thanks and can you share the hardcoded values?
02-11-2019 06:54 AM
AFAIK all of them are 5 days.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide