Network Access Control

Hi All,I am trying to integrate Sonus device with ISE. I have created profile in ISE with following attributes.Access Type = ACCESS_ACCEPTVendorSpecific = Vendor ID=2879Sonus suggested that RADIUS Access-Accept packet should return the following:RADI...

Hi  if i need policy set on Cisco ISE up 1000 policy how i do this ? because maxmum policy set version 2.4 up to 200 policy set. i have ise box 2 box, SNS 3595 and primary and standby NAD up to 8000+ and identity upto 1000+ users.

Hi team,   I have an question on the ISE license and need advise on that: if our customer wants to use the Posture Compliance feature on their PCs, do we need both the AnyConnect component + Apex license or only need the Apex license?   I think the a...

Hi team experts   Customer want to add a few custom field into self-registration form in guest portal .  for example ,  Region ID which also needs input-checking requirement ( for example only 3 letters is allowed  ) .   ISE may support to add custom...

Hi Guys   Is there a way to export the contents of all SGACLs in a system?  I know we ran export the matrix which includes the name of the SGACLs, just now looking to export the SGACL itself.   Ta Peter  

Hello, a general question please regarding BYOD onboarding; when users first connect to the initial unsecure onboarding SSID, their BYOD devices will not trust the ISE certificate due it having been issued by our local CA. Understandable Therefore is...

Is it possible to give a user access only to the alarm settings?

A customer wants to know if we can configure a WLAN environments with different sessions timeout per user. A WLAN environment where some users could enter with restricted time, such as Public WLAN where some users are registered with some session tim...

Hello,   Is it possible to create a read-only admin group in ISE  2.2 which provide read_only access to all the menus including policy set menus?   Regards, Maryam

I need to set the maximum number of failed login attempts for TACACS+ and RADIUS authentications and return a message to the user ("your account is now disabled...").   I have  ticked  Lock/Suspend Account with Incorrect Login Attempts, and set the n...

Hi all, with ISE 2.0 the support for installation on Linux KVM is introduced. To test this in our envirionment we tried to install it from the ise-2.0.0.306.SPA.x86_64.iso. Unfortunately, the installer stops after the hardware check, with a message ...

I am newbie to ISE still in training . I would like to know how to move users that use their TACACS accounts to start using their AD accounts.    Thanks Karim