02-04-2019 10:41 AM - edited 03-11-2019 01:54 AM
Hello folks,
This was an easy information to find in old Installing Guides but has been removed since then.
1) Considering a dedicated PSN (35xx), what is the max devices that it supports?
I've seen documents saying a 3515 after 2.1 can support 7.5k and 3595 can support 40k but haven't seen that for ISE 2.4.
2) This used to be public on the Install Guide (NW Deployment in ISE). On 2.4 is not there. Where can I find this public?
Thanks
Solved! Go to Solution.
02-04-2019 10:46 AM - edited 02-04-2019 10:47 AM
I'll admit, it's not as straight forward as it could be for dedicated deployments. It is covered in the scaling guide.
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
02-04-2019 10:46 AM - edited 02-04-2019 10:47 AM
I'll admit, it's not as straight forward as it could be for dedicated deployments. It is covered in the scaling guide.
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
02-16-2019 02:39 PM
Also see ISE Install Guide, Release 2.4 > Deployment Size and Scaling Recommendations and also the slides 29 and 32 of the reference slide deck for Designing ISE for Scale & High Availability - BRKSEC-3699
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide