03-13-2019 08:52 PM
My customer is asking about the compatible, stable and recommended deployment versions of ISE with DNA-C side.
Customer has the following current releases;
As per the ISE-2.6 Documentation: it says Cisco ISE is validated with Cisco Digital Network Architecture Center (DNA Center), Release 1.1.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/compatibility/b_ise_sdt_26.html
but on the DNA documentation: DNA 1.2.8 is compatible with ISE version 2.4 patch 2 and patch 5.
Here is the link to the matrix of supported versions: https://www.cisco.com/c/en/us/solutions/enterprise-networks/software-defined-access/compatibility-matrix.html
Please advise...
Solved! Go to Solution.
03-13-2019 10:49 PM
What could make this simpler is to avoid 2.6 for production or pilot unless you have a specific need of it. The recommended release only recently became 2.4.
There are some neat additions to 2.6 for the future, but most deployments don't require right right now.
The compatibility guides always trail behind because it takes time to test, certify, and update everything. ISE 2.6 has only been out for less than a month, it's relatively unproven, docs will eventually get updated. That said, it should work.
03-13-2019 10:49 PM
What could make this simpler is to avoid 2.6 for production or pilot unless you have a specific need of it. The recommended release only recently became 2.4.
There are some neat additions to 2.6 for the future, but most deployments don't require right right now.
The compatibility guides always trail behind because it takes time to test, certify, and update everything. ISE 2.6 has only been out for less than a month, it's relatively unproven, docs will eventually get updated. That said, it should work.
03-14-2019 02:53 AM
Damien is correct ,
It will work but 2.6 still needs some time before considered the golden image.
The golden image currently is 2.4p5
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide