cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4722
Views
80
Helpful
27
Replies

ISE 2.6 Patch 4 Deferred/Removed

obrien-r
Level 1
Level 1

For any like me that was awaiting some of the fixes in Patch 4 and jumped on and downloaded it, please be aware it has been deferred and removed from CCO due to a bug/problem it introduces. Bug is CSCvt18276

According to my CCO notification, the expected replacement - Patch 5 - is due approx 12 Mar

 

Anyway, hope that information helps someone...

27 Replies 27

Leo Laohoo
Hall of Fame
Hall of Fame

@obrien-r wrote:

the expected replacement - Patch 5 - is due approx 12 Mar


12 March 2020?  Is there enough time to test if Patch 5 fixes CSCvt18276 and, most importantly, not break anything else? 

NOTE:  ISE 2.6, patch 4 bring back "old memories" of the very, very short-lived ISE 2.4, patch 2 (ISE 2.4 Patch 2 Release Now Available).  

I would expect so as there is already a "hotfix" available from the TAC 

2.4 patch 4 was deferred, 4 is an unlucky number for ISE.

Thanks so much for this heads up!  We were going to install patch 4 this morning.  (had already downloaded it.)  Thankfully I saw this bug in my weekly Cisco email...

 

cjk

Leo Laohoo
Hall of Fame
Hall of Fame

Heads-up to everyone:  We are having tremendous issues with ISE 2.6, patch 6: Extremely high CPU + very high external authentication latency.

Thanks for sharing @Leo Laohoo . Did you get a BugID from the TAC?


@Marvin Rhoads wrote:

Did you get a BugID from the TAC?


No, @Marvin Rhoads.  

In order to stabilize the cluster, we had to roll back (and remove) patch 6.  

I'll pass on the Bug ID when TAC shares it with us.  

@Leo Laohoo In this case, which version is stable...relatively? I was gonna patch mine, but now I guess I need to wait a little bit. 


@Leo Laohoo wrote:

@Marvin Rhoads wrote:

Did you get a BugID from the TAC?


No, @Marvin Rhoads.  

In order to stabilize the cluster, we had to roll back (and remove) patch 6.  

I'll pass on the Bug ID when TAC shares it with us.  


 

For the time being, ISE 2.6, patch 5.

@Leo Laohoo Thanks!

 

Update: TAC believes there is a memory leak in the profiler.
No Bug ID (yet).
14 April 2020

Update: 23 April 2020
TAC has identified the issue to be CSCvt18276 which has re-emerged in patch 6.
I guess the next step is to wait for TAC to release a fix/patch to patch 6?

Sev 1 Catastrophic bug with 88 support cases re-appears!!!

So much for regression testing.

<facepalm>

Thanks for sharing the BugID @Leo Laohoo 

Does this only affect customers who need Guest Portal? 

What is the recommended ISE 2.6 patch release (patch 3 or 5?) 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: