ISE 2.6 run show run cli, it hangs at 'generating configuration

[lilianamartinez]

I have a client running ISE 2.6.0.156 Patch 7 . When we run show run , it hangs at 'generating configuration.' It works before , and all applications are running.

[marce1000]

- show application status ise (if not yet done), also look for performance bottlenecks on targeted host.

 M.

[moazizuddin · Accepted solution]

Found an old post where this was happening in ISE 1.3 and 1.4.

Fix was to disable cdp on GigabitEthernet 0

(no cdp run GigabitEthernet 0)

I was able to disable it temporarily, 'show run' starting working. Re-enabled CDP on GigabitEthernet 0, and 'show run' was still working.