ISE 2.6 SNMP Not Working

[GN974]

Hi Guys,

I am running ISE 2.6 in Active/standby mode, and the SNMP v2 works in the secondary box, but the same config is not working in the primary box, following is the config for snmp  v2.

snmp-server enable
snmp-server contact "FTC"
snmp-server location "DC2"
snmp-server trap dskThresholdLimit "80"
snmp-server host 172.16.1.11 version 2c tssnmp
snmp-server host 172.16.1.12 version 2c tssnmp
snmp-server community tssnmp ro

The access between the SNMP server and the ISE is already allowed,

Please let me whats wrong with the config, or any other  config needs to done to make it work.

Regard,

Ali

[hslai · Accepted solution]

As you said the same configuration working on the 2nd box, the configuration itself should be fine.

I would suggest to perform a tcpdump using ISE admin web UI and check whether it receiving the requests.