cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
787
Views
1
Helpful
4
Replies

ISE 2.7 to 3.2 Migration with fresh install

Praveen Kumar
Level 1
Level 1

Can I use backup from ISE 2.7 and restore that backup in ISE 3.2? 

1 Accepted Solution

Accepted Solutions

Charlie Moreton
Cisco Employee
Cisco Employee

As @Greg Gibbs said, this is un the Upgrade Journey as the Backup & Restore Upgrade.

See here for a Quick Access Guide:  https://cs.co/ise-upgrade-matrix

View solution in original post

4 Replies 4

Greg Gibbs
Cisco Employee
Cisco Employee

Yes. This is well documented in the ISE 3.2 Upgrade Journey document.

This is a parallel migration. The ISE 3.2 servers are all new. I wanted to know if I can backup the configurations on ISE 2.7 and restore the same configuration on ISE 3.2. Thanks. 

 

Charlie Moreton
Cisco Employee
Cisco Employee

As @Greg Gibbs said, this is un the Upgrade Journey as the Backup & Restore Upgrade.

See here for a Quick Access Guide:  https://cs.co/ise-upgrade-matrix

Thanks.