ISE 2.X and PCI Compliance

[warren.perils]

Is there a more recent version of the document below? This version maps ISE 1.2 to PCI 2.0. 

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Compliance/Compliance_DG/PCI_Compliance_DG/ch4_PCI.html

Any help would be appreciated.

Thanks!

Warren

[algoldst · Accepted solution]

Hi Warren,

I did get a response this morning from our folks with respect to PCI compliance.

The long and short is: everything is here: cisco.com/go/pci

Thank you,

[Jeffrey Jones]

so nothing really that mentions ISE and where it fits in, so not very helpful.

[Jason Kunst]

I have asked our product manager for PCI surasky to look into this

[Jeffrey Jones]

much appreciated, as I have a customer needing this info.

Thanks'

Jeff

[Jason Kunst]

Our expert is travelling, should have something in next few days

[Jeffrey Jones]

ok thanks, what i need for the customer run book I am putting together, is all aspects of ISE per each check of PCI compliance.

[surasky]

Hi Jeffrey,

ISE takes part in PCI compliance by making the segmentation process much easier. This can be done via TrustSec (restaurants https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/trustsec/trustsec_pci_validation.pdf) or by using ISE for auto VLAN assignment based on many different cretirieas: AD group, device profile and more. in ISE 2.4 we are going to allow customers to disable TLS 1.0/1.1 as part of the new PCI requirements.

please let me know if you need more info.

Tal