ISE 3.1 Compatibility with 5508 WLC running v8.5

[wifly]

Hi All,

Could someone please help me find the compatibility matrix for ISE 3.1 with 5508 WLC running v8.5?

I've checked on the Cisco Wireless Solutions Software Compatibility Matrix , but it only shows with the Prime Infrastructure where it doesn't show anything after ISE 2.7

Thanks.

[Mark Elsen]

       - Checkout : https://cs.co/ise-my-nads

 M.

[wifly]

Hi Marce,

I checked this link, but it only shows the capabilities of the NAD.

I'd like to check the compatibility of 5508 WLC v8.5 with ISE v3.0 or v3.1.

Currently the WLC works fine with ISE 2.4. If we upgrade ISE to 3.0 or 3.1, would 5508 v8.5 still be working with it?

Thanks.

[Mark Elsen]

                   >....If we upgrade ISE to 3.0 or 3.1, would 5508 v8.5 still be working with it
  - Whilst this is not conclusive I am quite sure  that it will , because in the end all what is needed is radius compatibility , it would become a more important question when the situation would be reversed , as in 'I have a brand new device , will it work with ISE 3.1' , that being said , look into phasing out the old wireless controller too.

 M.

[ahollifield]

https://www.cisco.com/c/en/us/products/collateral/wireless/5500-series-wireless-controllers/eos-eol-notice-c51-740221.html

https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/bulletin-c25-743964.html

https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/identity-service-engine-software-3-0.html