ISE 3.2 Patch 3

[eiklin]

Hi,

We are trying to apply Patch 3 of ISE 3.2 and found that the downloaded patch file has a wrong checksum as compared to the one specified on the website.

The downloaded patch file cannot be applied, and the error message was:

Any advise?

[Kasun Bandara]

@eiklin try downloading again. downloaded file seems like corrupted. 

[eiklin]

We have tried multiple times and downloaded via different ISPs. still same issue.

[Leo Laohoo]

Do not waste any time by contacting Cisco TAC.  Whatever someone did over the weekend is beyond any control of TAC.  This is the third (of four) threads that talks about corrupted file getting downloaded.  Escalate and reach out to your Cisco Account Manager because this could be something bigger.  

The other threads are:  

• https://community.cisco.com/t5/network-security/fmc-and-ftd-software-corrupt-images-invalid-md5sums/m-p/4908255
• https://community.cisco.com/t5/network-access-control/ise-patch-downloads-broken/m-p/4908178
• https://community.cisco.com/t5/network-security/error-when-trying-to-untar-cisco-fmc-virtual-vmware-image-7-2-4/m-p/4908387https://community.cisco.com/t5/network-access-control/ise-patch-downloads-broken/m-p/4908178

Most importantly:  

• DO NOT DOWNLOAD ANYTHING until this is sorted. 
• If the file(s) have already been downloaded, do not make any attempts to unpack them.  
• I do not even want to spell out what needs to happen if the file(s) have been unpacked.  

[thomas · Accepted solution]

Yes, this was a known problem last week. You may see the banner on software.cisco.com stating this:

Please try downloading again today. I just did it for ISE 3.2 Patch 3 and I got the correct checksum:

md5 ise-patchbundle-3.2.0.542-Patch3-23071904.SPA.x86_64.tar.gz
MD5 (ise-patchbundle-3.2.0.542-Patch3-23071904.SPA.x86_64.tar.gz) = 58cdb2e73ae699418e05bb3e85a79d7b

[eiklin]

Thank you verified ok