06-09-2021 05:23 AM
Hi ,
Please for ISE 3.0 , is it necessary to have the Agents anyconnect apex to do posture as the ISE 2.X before or we can do the posture without agents?
Thanks for your support.
Best Regards.
Solved! Go to Solution.
06-09-2021 05:48 AM
Please for ISE 3.0 , is it necessary to have the Agents anyconnect apex to do posture as the ISE 2.X before or we can do the posture without agents?
-You can perform agentless posturing. See below:
How To: Agentless Posture Configuration, validation & Troubleshooting - Cisco Community
Note you still need proper licensing (premier for posture visibility/enforcement). See below:
HTH!
06-09-2021 05:48 AM
Please for ISE 3.0 , is it necessary to have the Agents anyconnect apex to do posture as the ISE 2.X before or we can do the posture without agents?
-You can perform agentless posturing. See below:
How To: Agentless Posture Configuration, validation & Troubleshooting - Cisco Community
Note you still need proper licensing (premier for posture visibility/enforcement). See below:
HTH!
06-09-2021 06:04 AM
Hi Mike,
Thanks for your support .
Please there is any comparison between the anyconnet agent mode and the agentless mode ? just to know the difference in the case of ISE 3.0.
Best Regards.
Siham
06-14-2021 05:07 PM
The ISE 3.0 Posture & Compliance Webinar includes an overview of the various different Posture deployment options and their capabilities.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide