ISE access custom-web templates directly
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-05-2014 05:37 AM - edited 03-10-2019 09:29 PM
Hey guys,
I am having trouble with a ISE (1.2 patch5) at a customers site when deploying customized html pages for wireless guest-access. The reason we need to use these customized templates is that the language template for the AUP seems not to supprt too many characters and the customers AUP just shows about 20% of these. Therefore I wanted to use the multi-portal configuration to upload a set of html files generated from the samples provided by cisco documentation. The customer complains about missing logos and that the success page is complete html code. I have only remote-desktop access to open the CLI and web-gui of ISE and cannot test for myself the behavior of the pages rendered by ISE.
My question is: Is there a way to open the custom web-page without having to connect to the ISE via WLC? something like:
https://IP:PORT/guestportal/multiportal/CUSTOMPORTAL
I thought I had it in earlier versions of ISE but cannot find the URL anymore.
Some specs around ISE and WLC:
virtual ISE, standalone deployment, version 1.2 Patch 5
WLC2504 running version 7.4.121.0
It is for guest access, so it has to work for most common mobile devices and mobile-workstations(Note- and Macbooks).
Thanks for your help.
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-05-2014 06:09 AM
Patrick,
For the click-through flow to work correctly, you must have the custom portal set as the default on the ISE. To access the portal from your web browser, go to:
https://IPAddress:8443/guestportal/Login.action?portalname=CustomPortalName
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
