whats the best practice for the integration when the ise deployment is a large one?
on the guide they talked about a 2 node deployment:
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-dnac-ise-deploy-guide.html
but what about when the deploment is a large one?
should the integration from the DNAC point to he IP address of a dedicated PXGRID NODE, i know thats clear but the questions come from the following.
Does the ERS READ/WRITE permissions are for the PAN? or for any PXGRID NODE?
because in that case if at the moment of the integration i set the IP ADDRESS of a dedicated PXGRID NODE(thats not running the PAN persona) DNAC wont be able to apply changes to the SGTs?
can someone confirm if misinterpreting the guide or the concept, or if neccesary to enable the PXGRID PERSONA on the PAN for this specific case?
Saludos,
Gerardo Mejia