ISE and nexus compatibility

[lilimtzrmz]

Hi there, I was searching in the ISE matrix compatibility if the next Nexus model can be integrated with ISE but I didn't find it. Do you know if is there any official documentation about it ?

• N3K-C3548P-10GX
• N5K-C5548UP
• N5K-C56128P
• N5K-C5672UP
• N77-C7702
• N9K-C93108TC-EX
• N9K-C93108TC-FX
• N9K-C93360YC-FX2
• N9K-C9372PX
• N9K-C9504

Additional does anyone know where I can find other vendors as aruba, dell and palo alto compatibility matrix?

[ammahend]

ISE uses standard radius protocol, any device that supports radius is technical compatible.

ise-aruba : https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200270-ISE-2-0-3rd-Party-integration-with-Aruba.html

See more nexus info here :  https://www.cisco.com/c/en/us/td/docs/security/ise/3-1/compatibility_doc/b_ise_sdt_31.html

ise -palo : https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFsCAK

just google it you will find other vendors as well. 

[MHM Cisco World]

ISE can be as network access radius or as admin tacacs, both compatible with NSK.

[Greg Gibbs · Accepted solution]

Does ISE Support My Network Access Device? 

You can find an example of the Nexus configuration for TACACS+ with ISE in the Cisco ISE Device Administration Prescriptive Deployment Guide.

You will not likely find many references for RADIUS endpoint authentication for Nexus switches as 802.1x is not commonly used in the Data Center. There are limitations in many server switches, NICs, Operating Systems, etc. and the physical security present in the DC reduces the need for 802.1x.