07-15-2012 01:53 AM - edited 03-10-2019 07:18 PM
Hi Guys,
Need help regarding ISE configuration. I have ISE in the network and want to do some basic like simple authentication , authorization and some policies with the wired clients.
Please provide any docuemnt or links to do this (too urgent)
Thanks...
07-15-2012 02:07 AM
You find the ISE-documentation on the following page:
http://www.cisco.com/en/US/products/ps11640/products_user_guide_list.html
If you have used the ACS before, you should read the migration-guides:
http://www.cisco.com/en/US/docs/security/ise/1.1/migration_guide/ise_migration_guide.html
07-16-2012 03:09 AM
The Trustsec design guide was very helpfull for me. It also covers other parts like WLAN.
www.cisco.com/en/US/docs/solutions/Enterprise/Security/TrustSec_2.0/trustsec_2.0_dig.pdf
07-16-2012 03:54 PM
Fazal,
Here is a guide that shows the switch configuration -
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_sw_cnfg.html
Also are you a Cisco partner, if so there is some training that should be available to you. Keep in mind when deploying Cisco is requiring that an ATP be selected for the deployment for all types except wireless.
Good luck!
Tarik Admani
*Please rate helpful posts*
07-16-2012 10:17 PM
Hey Frazel,
I would recommend you check out some of the Smart Business Architecture (SBA) documentation at http://www.cisco.com/go/sba/. It is straightforward documentation with lots of screenshots and easy to follow instructions to get you up and running with a wide range of Cisco products.
Here are a list of documents that have to do with ISE:
Advanced Guest Wireless Deployment Guide
BYOD-Internal Corporate Access Deployment Guide
BYOD-Identification and Authentication Deployment Guide
BYOD-Guest Wireless Access Deployment Guide
Based on some of the things you want to do I think you are looking for the Internal Corporate Access Deployment Guide and the Identification and Authentication Deployment Guide.
Please let me know if you have any questions or comments about SBA!
-Miles
07-17-2013 03:40 AM
Go through following link that will help you with basic configuration
Cisco Identity Services Engine Configuration Examples and TechNotes
http://www.cisco.com/en/US/products/ps11640/prod_configuration_examples_list.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide