cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2504
Views
0
Helpful
2
Replies

ISE bootable flash drive not recognized

James Strong
Level 1
Level 1

I was working with a client to re-image his 3495 appliance. We created a bootable USB flash drive using Rufus 2.11. We formatted it as FAT32 and added the ISE 1.3 ISO as the O/S. When we booted the appliance and accessed the menu to choose a boot device, the USB flash drive was not an option. The client finally found a DVD writer and created a boot DVD. My question is around what format the boot USB drive should be. Should it be FAT16, FAT32, or NTFS?

Thanks for any replies in advance,

1 Accepted Solution

Accepted Solutions

hslai
Cisco Employee
Cisco Employee

Prior to ISE 2.0.1, please follow the steps in Create a Bootable USB Drive to use iso-to-usb.sh to create the USB flash thumb drive to install ISE. ISE 2.0.1+ works using the generic tool.

View solution in original post

2 Replies 2

hslai
Cisco Employee
Cisco Employee

Prior to ISE 2.0.1, please follow the steps in Create a Bootable USB Drive to use iso-to-usb.sh to create the USB flash thumb drive to install ISE. ISE 2.0.1+ works using the generic tool.

James Strong
Level 1
Level 1

Thank you for the answer. i will relay this to my client.