cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2821
Views
5
Helpful
2
Replies

ISe Comliance Module and CrowdStrike Compatibiltiy

cbaiocchetti1
Level 1
Level 1

Hello,

 

My organization has recently deployed ISE in our environment.  Currently we are running version 2.3.0.298.

We will soon be upgrading our AnyConnect / ISE solution to the following build in order to stay current with releases from Cisco:

 

VPN Core version 4.7.03052

ISE Posture Module version 4.7.03052

ISE Compliance Module version 4.3.695.6144

 

Our endpoint Security solution is CrowdStrike, currently running at version 4.26.8904.0

CrowdStrike has recently introduced version 5.X of their endpoint sensor.  In testing, CrowdStrike 5 seems to work with the above-listed ISE components ... no issues with noncompliance or any other problems.  Unfortunately, I am not able to find any official Cisco documentation  stating that ISE supports, or is compatible with, CrowdStrike 5.X. 

 

Is anyone able to point me to documentation that I have likely missed showing that version 5 is supported?  If not, is there any news on when it would be officially supported?

 

Thank you in advance.

 

Chris

1 Accepted Solution

Accepted Solutions

Jason Kunst
Cisco Employee
Cisco Employee

Its not clear what type of integration you're looking for? I just looked at the vendors site and they have many different offerings.
I assume since you're discussing anyconnect then you are discussing some sort of AV/AS anti-malware integration?
I looked through the support charts and found crowdstrike and you're correct it doesn't have your version - https://www.cisco.com/c/en/us/support/security/identity-services-engine/products-device-support-tables-list.html


I would recommend a tac case to track and attach to. For more information see How to get help from the community at http://cs.co/ise-help

 

If not our alliance partners are listed here and don't mention any other integrations.
https://www.cisco.com/c/m/en_us/products/security/technical-alliance-partners.html

View solution in original post

2 Replies 2

Jason Kunst
Cisco Employee
Cisco Employee

Its not clear what type of integration you're looking for? I just looked at the vendors site and they have many different offerings.
I assume since you're discussing anyconnect then you are discussing some sort of AV/AS anti-malware integration?
I looked through the support charts and found crowdstrike and you're correct it doesn't have your version - https://www.cisco.com/c/en/us/support/security/identity-services-engine/products-device-support-tables-list.html


I would recommend a tac case to track and attach to. For more information see How to get help from the community at http://cs.co/ise-help

 

If not our alliance partners are listed here and don't mention any other integrations.
https://www.cisco.com/c/m/en_us/products/security/technical-alliance-partners.html

Hello Jason,

Thank you for your reply. Apologies for not being clearer, but you were correct that I was looking at AV integration.

I'll open a case as suggested.

Cheers.

Chris