cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
860
Views
5
Helpful
2
Replies

ISE Compatibility Table Error & Request for Confirmation

scamarda
Cisco Employee
Cisco Employee

The ISE 2.2 compatibility table does not have a reference to the 3650 switch.   Just the 3650-c switch is listed. There is a line for it below the 3850 but the switch model number is not listed there. It is present in the 2.1 table.  Also, the 2.1 version and 2.2 unlabeled version reflect 3.3.5E as the recommended version.   This release is in Deferred status and not downloadable from CCO.  The 3850 lists 3.6.5.  Since these are essentially the same switch, can 3.6.5 be considered stable for the 3650?

1 Accepted Solution

Accepted Solutions

Timothy Abbott
Cisco Employee
Cisco Employee

Hi,

I'm pretty confident that the 3850 and 3650 run similar versions of IOS XE software.  It could be that the 3650 was accidentally left out of the matrix.  The currently recommended release on CCO is 3.6.6 for both platforms.

Regards,

-Tim

View solution in original post

2 Replies 2

Timothy Abbott
Cisco Employee
Cisco Employee

Hi,

I'm pretty confident that the 3850 and 3650 run similar versions of IOS XE software.  It could be that the 3650 was accidentally left out of the matrix.  The currently recommended release on CCO is 3.6.6 for both platforms.

Regards,

-Tim

Thanks Tim.