09-06-2017 08:37 AM
Hi Team,
One of our client wants to deploy ISE for their manufacturing units. They have some automated PC control manufacturing ROBOT. They are part of the network. Their concern is, if any point of time, if ISE fail, their VLAN assign to those critical device should be continue working.
So that local switch associate with those device and PC should work properly.
Can we segregate that and design with our ISE.
Please advice.
Regards
Anjan
Solved! Go to Solution.
09-06-2017 04:07 PM
If these are that critical I am assuming they know exactly what ports they are plugged into. If so then they can configure the critical auth VLAN for that port to be the VLAN the robots needs to be on.
09-06-2017 04:07 PM
If these are that critical I am assuming they know exactly what ports they are plugged into. If so then they can configure the critical auth VLAN for that port to be the VLAN the robots needs to be on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide