cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
966
Views
0
Helpful
1
Replies

ISE GUI menu missing

Madura Malwatte
Level 4
Level 4

I am in the processes of upgrading ISE 1.3 with a new deployment of 2.3, and having trouble seeing the full menu in the GUI, it looks the menu tabs are cut off. I can only see Home and Operations tab. I need to get into the existing ISE to check the policies.

 

This device is the Primary Admin node and tested with IE 11.0 and Firefox 61 both showing same issue.

 

It's most likely I need an older browser version to access the GUI from, but just wanted to check here if anything else I can try?

IE

Screen Shot 2018-09-04 at 11.45.34 pm.jpg

 

Firefox
Screen Shot 2018-09-04 at 11.49.39 pm.jpg

 

1 Accepted Solution

Accepted Solutions

kvenkata1
Cisco Employee
Cisco Employee

Please ensure you are using a supported browser as per ISE 1.3 release notes., specifically following TLS version & Flash player comments.

https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/release_notes/ise13_rn.html#pgfId-351028

 

- Krish

View solution in original post

1 Reply 1

kvenkata1
Cisco Employee
Cisco Employee

Please ensure you are using a supported browser as per ISE 1.3 release notes., specifically following TLS version & Flash player comments.

https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/release_notes/ise13_rn.html#pgfId-351028

 

- Krish

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: