11-08-2023 12:17 PM
I installed fresh ISE vm OVA image version 3.1 and 3.2 and did the initial configuration. ISE service is running, but the port 443 is missing from all server. I did "show ports | include :443" and nothing.
How I can enable the https ? Please can you advise
Solved! Go to Solution.
11-08-2023 08:18 PM - edited 11-09-2023 04:36 AM
Assuming the application server is running (show app status ise), you may be hitting this bug:
https://bst.cisco.com/bugsearch/bug/CSCwa08018
Enable ipv6 in the cli config to fix it.
The root cause is that some internal docker containers use ipv6 and it being disabled globally prevents the necessary inter-process communications needed to bind the web server to tcp/443.
11-08-2023 08:18 PM - edited 11-09-2023 04:36 AM
Assuming the application server is running (show app status ise), you may be hitting this bug:
https://bst.cisco.com/bugsearch/bug/CSCwa08018
Enable ipv6 in the cli config to fix it.
The root cause is that some internal docker containers use ipv6 and it being disabled globally prevents the necessary inter-process communications needed to bind the web server to tcp/443.
11-09-2023 06:22 AM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide