11-13-2017 01:57 PM
hi Experts,
Is there any document other than the compatibility guide that I can use to determine if the following HP switches are supported?
The customer mentions that they will upgrade to the code to K_16_02_0021, but the code doesn't match the recommended codes mentioned in the compatibility guide:
Will the K_16.x.x work with ISE?
Regards,
Solved! Go to Solution.
11-13-2017 02:00 PM
https://communities.cisco.com/docs/DOC-75329
11-13-2017 02:00 PM
https://communities.cisco.com/docs/DOC-75329
11-14-2017 08:17 PM
For better visibility, I am answering a related post on the working HP profiles/configs posted here: https://communities.cisco.com/docs/DOC-64547
For the HP2920, you can see the supporting version is ISE 2.1. This indicates that the switch was tested using the DNS/DHCP with Auth VLAN feature to provide support for the more advanced flows. The switch is configured for RADIUS CoA and VLANs to allow authorization into an Access VLAN that bypasses ISE DNS/DHCP after successful authorization.
The HP3800 was tested based on ISE 2.0 features with static URL redirect to handle the advanced web flows.
Hope that clarifies.
Craig
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide