08-26-2023 03:16 AM
Hi all;
As you know, ISE Messaging Service (introduced ins ISE 2.6) is responsible for MnT WAN survivability and SYSLOG over TLS functionalities. As far as I know, ISE have similar functionality (see the figure below). Am i right?
Solved! Go to Solution.
08-27-2023 02:09 PM - edited 08-27-2023 02:09 PM
@rezaalikhani the image you posted shows the configuration in ISE that is used if you want ISE to send SYSLOGs to a remote SYSLOG receiver using TCP. e.g if you wanted to send secure SYSLOGs to your own Solarwinds/Splunk etc.
The default TCP port for secure SYSOG is 6514. But ISE doesn't use it natively. I have never seen this enabled out of the box. "ISE Messaging Service" uses TCP/8671 and it's under the hood - you don't get to play with the port settings.
08-27-2023 02:09 PM - edited 08-27-2023 02:09 PM
@rezaalikhani the image you posted shows the configuration in ISE that is used if you want ISE to send SYSLOGs to a remote SYSLOG receiver using TCP. e.g if you wanted to send secure SYSLOGs to your own Solarwinds/Splunk etc.
The default TCP port for secure SYSOG is 6514. But ISE doesn't use it natively. I have never seen this enabled out of the box. "ISE Messaging Service" uses TCP/8671 and it's under the hood - you don't get to play with the port settings.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide