cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

295
Views
0
Helpful
2
Replies
Highlighted
Beginner

ISE MDM integration with BES 12.5 not working with seperate Admin/PSN

I am running into a issue where by the MDM integration with ISE is working in the Lab but not in Production. Trying to troubleshoot.

ISE 1.4 Patch 6 and BES 12.5

The only difference between Lab and Prod is , Lab is both Admin/PSN and Prod has it separated.

TCP dump shows nothing leaving the PSN.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: ISE MDM integration with BES 12.5 not working with seperate Admin/PSN

Call TAC for troubleshooting.

Especially if it works in your lab and not production.  8-)

For any potential firewall issues, see the ISE Ports Reference inside the ISE 1.4 Installation Guide.

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Re: ISE MDM integration with BES 12.5 not working with seperate Admin/PSN

Call TAC for troubleshooting.

Especially if it works in your lab and not production.  8-)

For any potential firewall issues, see the ISE Ports Reference inside the ISE 1.4 Installation Guide.

View solution in original post

Highlighted
Beginner

Re: ISE MDM integration with BES 12.5 not working with seperate Admin/PSN

Well the lab had Patch 8. TAC pointed out that it was a fix in Patch 8. We are going to 2.1 anyway so will defer.