ā10-04-2022 10:34 AM
Hello,
We've just completed the installation of our Six ISE Nodes; 2 3695s and 4 3655s. The Software version is ISE Version 3.1.0.518
I'm still uncertain of the Patch Requirement. Would I need to install the Four (1-4) Version 3.1 Patches? Or, just Cumulative Patch 4? Or do I need to Patch at all given the ISE Version we're at now? I'm unable to so far discern that at present.
Thank you,
Terry
Solved! Go to Solution.
ā10-19-2022 09:55 AM
Since ISE patches are always cumulative, they include all fixes and updates in the earlier patch releases for a given version. So, in your case you need only install 3.1 Patch 4 (which is the current latest 3.1 patch as of this posting).
It's ""ise-patchbundle-3.1.0.518-Patch4-22091704.SPA.x86_64.tar.gz, found here:
https://software.cisco.com/download/home/283801620/type/283802505/release/3.1.0
(FYI, patch 2 was found to be defective and was withdrawn from the downloads site in case you were wondering.)
ā10-19-2022 09:55 AM
Since ISE patches are always cumulative, they include all fixes and updates in the earlier patch releases for a given version. So, in your case you need only install 3.1 Patch 4 (which is the current latest 3.1 patch as of this posting).
It's ""ise-patchbundle-3.1.0.518-Patch4-22091704.SPA.x86_64.tar.gz, found here:
https://software.cisco.com/download/home/283801620/type/283802505/release/3.1.0
(FYI, patch 2 was found to be defective and was withdrawn from the downloads site in case you were wondering.)
ā10-19-2022 12:22 PM
Hello,
This helped immensely. Thank you for having responded and adding the information about patch 2.
Best Regards,
Terry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: