Solved: Re: ISE-PIC Agent with AD

Kevyn · ‎09-22-2023

Hi.

I'm trying integrate ise-pic with active directory (using MS-RPC), the connection has established but the users information do not appear.

The ise-pic agent installed on the DC show me the following message:

"Rest Client, Error sending mapping {user=dummyMapping, ip=192.168.10.39} to https://PMSP-CISCO-ISE.pmsp.local:9095 : String was not recognized as a valid DateTime."

I changed the timezone of the DC but the same message appear.

The DC and the ISE server are in the same timezone.

marce1000 · ‎09-22-2023

- Note sure , engage TAC on the issue ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎09-22-2023

- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwe39262

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Kevyn · ‎09-22-2023

Thanks for the answer!

The changes had no effect. I have a standalone node

This bug have a hotfix patch?

-

marce1000 · ‎09-22-2023

- Note sure , engage TAC on the issue ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

ahollifield · ‎09-22-2023

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216512-configure-evt-based-identity-services-en.html