09-02-2016 01:36 PM - edited 03-11-2019 12:03 AM
Hello,
A client has ISE1.2 and the licenses will be expired next week. They are not ready to upgrade v1.2 to the v2.1 before the license expiration. The question is, can the new Plus and APEX license be applied on ISE v1.2?
Solved! Go to Solution.
09-02-2016 03:05 PM
Hi,
You cannot install Apex on ISE 1.2. It can be install from 1.3 on wards. Rest existing license needs to be renewed.
For reference:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_license.html#89597
http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_0110.html#concept_E664BCA9F4164C7F8DE590B7C2C4AD99
Regards
Gagan
PS: rate if it helps!!!!
09-02-2016 03:05 PM
Hi,
You cannot install Apex on ISE 1.2. It can be install from 1.3 on wards. Rest existing license needs to be renewed.
For reference:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_license.html#89597
http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_0110.html#concept_E664BCA9F4164C7F8DE590B7C2C4AD99
Regards
Gagan
PS: rate if it helps!!!!
09-07-2016 03:35 AM
Hi Martin,
Let me know if you have any further queries.
Regards
Gagan
PS: rate if it helps!!!
03-03-2017 03:59 AM
Does this mean that the 'new' Plus license (with pxGrid, internal CA, etc) can be installed on ISE 1.2 even though this ISE version doesn't have all the features that the license has?
I know that Plus license was introduced with ISE 1.2, but I'm just wondering if from this version's perspective is the same thing.
Thanks,
Octavian
03-03-2017 08:44 AM
Hi Octavian,
License also gets upgrade during the actual upgrade of ISE from 1.2 to 1.3.
However, if you use it in ISE1.2, it will not serve the purpose of Internal CA.
Licensing got changed from ISE 1.3. They break the Advanced into plus and Apex.
Regards
Gagan
PS: rate helpful posts!!!!
03-06-2017 03:12 AM
Hi Gagan,
I know about the license persistence in case of the upgrade and about the new licensing model.
My question is simple as that: Is the new ISE Plus license compatible with 1.2?
Can it be installed on top of ISE 1.2? Did you installed a 'new' ISE Plus license on ISE 1.2?
Thanks,
Octavian
03-07-2017 06:16 PM
I have never tried that. However, as per my understanding, it shouldn't work until and unless, it gets upgraded or installed on fresh installed ISE.
Regards
Gagan
03-09-2017 11:52 PM
Ok. Thanks!
I'll get back with a feedback after I install the license.
Let's hope i'll work.
Octavian
03-10-2017 08:30 AM
Sure, let me know if you face any issues.
Regards
Gagan
08-30-2017 11:58 PM
Hi
can anyone confirm?
A customer had bought ISE 1.2 with advanced licenses and got upgraded in the meantime and is now running 2.x
can anyone confirm that his advanced license of 2500 endpoints purchased in 1.2 got divided over 2500 plus en 2500 APex?
i remember something that because cisco changed the licensing after 1.2, they migrated the licenses twice for the time remaining
I thoughed they presented it in 2015 but i can't find the slides anywhere
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide