cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

278
Views
0
Helpful
1
Replies
Highlighted
Cisco Employee

ISE posture for static IP using auth VLAN

Hi,

 

Due to compliance/posture check using third party switch, Auth VLAN has been deployed and some of the endpoint is using static IP. What is the best way to predeploy AnyConnect profile for known discovery host - PSN automatically, considering Auth VLAN will require user to "change" IP upon moving from auth to production VLAN.

 

Thanks

Wing Churn

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Please review info at Pre-Deploying AnyConnect in AnyConnect Admin Guide. Specific to ISE Posture is to include an ISE Posture profile with the DiscoveryHost and other fields configured accordingly.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Please review info at Pre-Deploying AnyConnect in AnyConnect Admin Guide. Specific to ISE Posture is to include an ISE Posture profile with the DiscoveryHost and other fields configured accordingly.

View solution in original post

Content for Community-Ad