10-22-2018 09:28 AM - last edited on 10-22-2018 12:50 PM by hslai
Hi,
Due to compliance/posture check using third party switch, Auth VLAN has been deployed and some of the endpoint is using static IP. What is the best way to predeploy AnyConnect profile for known discovery host - PSN automatically, considering Auth VLAN will require user to "change" IP upon moving from auth to production VLAN.
Thanks
Wing Churn
Solved! Go to Solution.
10-22-2018 12:53 PM
Please review info at Pre-Deploying AnyConnect in AnyConnect Admin Guide. Specific to ISE Posture is to include an ISE Posture profile with the DiscoveryHost and other fields configured accordingly.
10-22-2018 12:53 PM
Please review info at Pre-Deploying AnyConnect in AnyConnect Admin Guide. Specific to ISE Posture is to include an ISE Posture profile with the DiscoveryHost and other fields configured accordingly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide