05-16-2013 10:34 AM - edited 03-10-2019 08:26 PM
Hi Guys,
i'd like to know if is it possible to make a posture to Guest Clients using the Web Agent after they had been login into the portal.
thanks
05-20-2013 04:19 AM
Of Course it is possible. For detailed information please review the following guide
Configuring Client Posture Policies
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_client_prov.html
You can also create posture-specific authorization policies for all wired, wireless, and guest deployments by
specifying the Session:PostureStatus attribute in the authorization policies. This attribute has three
values, unknown, compliant, and noncompliant, which you can use n the authorization policies
Regards,
Ashok
09-25-2013 02:45 AM
Hi Daniel,
The Client Provisioning portal provides posture assessments and remediations for guest users. When guests request network access, you can route them to the Client Provisioning portal and require them to first download the client provisioning agent.
Also check the below link,
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_guest_pol.html#wp1529300
09-26-2013 02:13 AM
Hi
Please go through the given link:
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mnt.html#wp1054328
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide