Hello Guys,
Could someone help me with the root cause of the below ISE Radius logs all wireless users for one particular site. It shows in loop till the TLS timer expires
12505 | Prepared EAP-Request with another EAP-TLS challenge |
| 11006 | Returned RADIUS Access-Challenge |
| 11001 | Received RADIUS Access-Request |
| 11018 | RADIUS is re-using an existing session |
| 12504 | Extracted EAP-Response containing EAP-TLS challenge-response |
| 12505 | Prepared EAP-Request with another EAP-TLS challenge |
| 11006 | Returned RADIUS Access-Challenge |
| 11001 | Received RADIUS Access-Request |
| 11018 | RADIUS is re-using an existing session |
| 12504 | Extracted EAP-Response containing EAP-TLS challenge-response |
| 12505 | Prepared EAP-Request with another EAP-TLS challenge |
| 11006 | Returned RADIUS Access-Challenge |
| 11001 | Received RADIUS Access-Request |
| 11018 | RADIUS is re-using an existing session |
| 12504 | Extracted EAP-Response containing EAP-TLS challenge-response |
| 12505 | Prepared EAP-Request with another EAP-TLS challenge |
| 11006 | Returned RADIUS Access-Challenge |
| 12935 | Supplicant stopped responding to ISE during EAP-TLS certificate exchange ( Step latency=120000 ms) |
| 61025 | Open secure connection with TLS peer |
| 5411 | Supplicant stopped responding to ISE |