cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

243
Views
5
Helpful
1
Replies
aravikumar
Beginner

ISE super admin not able to add Network devices

Hello,

 

In one of our customer environments, ISE admin access is configured to use External AD groups. The super admin user who is in AD ISE super admin group is not able to add network devices. But according to the guide, super admin should be able to add or delete network devices and configure policy sets.

 

Thanks,

 

Aravind Ravikumar.

1 ACCEPTED SOLUTION

Accepted Solutions
Timothy Abbott
Cisco Employee

I have the same scenario configured in my lab it works without issue.  If the customer hasn't modified RBAC permissions for that group, I suggest the customer open a TAC case to investigate further.

 

Regards,

-Tim

View solution in original post

1 REPLY 1
Timothy Abbott
Cisco Employee

I have the same scenario configured in my lab it works without issue.  If the customer hasn't modified RBAC permissions for that group, I suggest the customer open a TAC case to investigate further.

 

Regards,

-Tim

View solution in original post

Content for Community-Ad