03-04-2018 11:29 PM - edited 02-21-2020 10:47 AM
Hello,,
I would like to allow entry level admins to be able to configure all switch access interfaces/ports. What is the command? I've tried different commands but to no avail. Below are what I have tried so far but do not work. Any assistance is appreciated. Thanks.
permit configure interface all
permit configure interface GigabitEthernet all
permit configure interface .*
permit configure interface GigabitEthernet .*
Richard
Solved! Go to Solution.
03-05-2018 12:16 AM
Hi there,
The columns are grant, command, argument. So you will want something like:
permit configure terminal permit interface GigabitEthernet.*
cheers,
Seb.
03-23-2018 03:14 AM
Hi Richard,
It should be:
Permit shutdown Permit no shutdown
Leave out the .*
cheers,
Seb.
03-05-2018 12:16 AM
Hi there,
The columns are grant, command, argument. So you will want something like:
permit configure terminal permit interface GigabitEthernet.*
cheers,
Seb.
03-05-2018 01:38 AM
Hi Seb,
Thank you for responding and explaining. I will give it a try and let you know.
Richard
03-05-2018 09:13 AM
Hi Seb,
That worked. Thank you again.
Richard
03-22-2018 05:03 PM
Hi Seb,
I have another question. How can I grant shutdown and no shutdown commands.
I've tried different ways but could not get it to work. For example
permit shutdown .*
permit no shutdown .*
permit interface GigabitEthernet.* shutdown
permit interface GigabitEthernet.* no shutdown
Appreciate your help. Thanks.
Richard
03-23-2018 03:14 AM
Hi Richard,
It should be:
Permit shutdown Permit no shutdown
Leave out the .*
cheers,
Seb.
03-23-2018 08:45 AM
Hi Seb,
Thank you for the quick reply. I think I'm understanding the process now.
Richard
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: