cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
447
Views
0
Helpful
1
Replies

ISE / TACACS Connection Issue

austindb95
Beginner
Beginner

I am running an ISE VM in GNS3 and trying to integrate it into my lab network but can't seem to get it to work. Debug is attached. Also, I'm 100% sure the shared secret matches, and I see nothing on the ISE server in the tacacs live logs.

 Capture.PNG

 

 

1 Accepted Solution

Accepted Solutions

austindb95
Beginner
Beginner

Solved.

This is a prime example why you don't lab for hrs without a break way past the time you normally go to bed.

I stood up multiple ISE server testing a few things and broke them back down again. The one that I used for the lab, I apparently never deployed it for profiling. 

Sorry for wasted post, but maybe it can help some in later down the line.

View solution in original post

1 Reply 1

austindb95
Beginner
Beginner

Solved.

This is a prime example why you don't lab for hrs without a break way past the time you normally go to bed.

I stood up multiple ISE server testing a few things and broke them back down again. The one that I used for the lab, I apparently never deployed it for profiling. 

Sorry for wasted post, but maybe it can help some in later down the line.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers