07-03-2013 12:04 PM - edited 03-10-2019 08:36 PM
I have and Standalone installation running version 1.1.2.145. The feature of TCP Dump appears to not be working. Every time I open it indicates Status: Loading .... but nothing happen after serveral minutes ...
If I click the Delete button a confirmation is requested but, an error is inmediately display.
Does anyone have idea how to fix this issue?
Regards
Daniel Escalante
07-03-2013 04:48 PM
In my research, I could only find that Inline posture node can't be chosen from GUI as a source for tcpdump utility.
It generate the following meaningless error:
Error: fault.faultCode
Fault: fault.faultString
Detail: fault.faultDetail
If ISE is a VM, then make sure promiscuous mode is enabled on ESX for interface
http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_mnt.html
~BR
Jatin Katyal
**Do rate helpful posts**
07-03-2013 07:17 PM
Thanks for your reply ...
As I said, the ISE is in STANDALONE mode. In this case it is a 3315 model, not VM
07-03-2013 08:54 PM
It seems like a bug. I tried with a VM, version 1.1.3 without patches and it's OK. Tomorrow will try with a 3315 with ISE 1.1.3 with patch 2.
07-04-2013 11:43 AM
I tried it on 1.1.2 ISE appliance 3315 and it did work. Did that work before for you? Could you restart the services and try again.
~BR
Jatin Katyal
**Do rate helpful posts**
07-04-2013 12:07 PM
I probably can restart services until tomorrow. Do you mean issue application service ise stop/start through the CLI?
Actually I never used TCP Dump before, when I realized this feature exist I did a quick test but after that never worked.
Regards.
07-04-2013 12:32 PM
through CLI
application stop ise
application start ise
Or
try to reload the server.
~BR
Jatin Katyal
**Do rate helpful posts**
07-05-2013 12:42 AM
last month this also happen with me on 1.1.2...
it was because i try start - stop - start - stop...
just like Jatin's advice, i restart the ISE and it fixed....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide