01-31-2013 01:00 AM - edited 03-10-2019 08:02 PM
Hi,
I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.
DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
Stopping ISE application before upgrade...
Running ISE Database upgrade...
% Application upgrade failed. Please check logs for more details.
Regards
Solved! Go to Solution.
01-31-2013 02:39 AM
Hi,
Try to go to v1.1.1 first, add patch 3 and then go to v1.1.2.
From ISE relaese notes:
Upgrade from Cisco ISE, Release 1.1.1 to release 1.1.2
Before you can upgrade to Cisco ISE, Release 1.1.2, you must first be sure you have upgraded your machine to Cisco ISE, Release 1.1.1 with patch 3 applied. For specific instructions on performing the upgrade procedure, see the Cisco Identity Services Engine Upgrade Guide, Release 1.1.x.
HTH
01-31-2013 02:39 AM
Hi,
Try to go to v1.1.1 first, add patch 3 and then go to v1.1.2.
From ISE relaese notes:
Upgrade from Cisco ISE, Release 1.1.1 to release 1.1.2
Before you can upgrade to Cisco ISE, Release 1.1.2, you must first be sure you have upgraded your machine to Cisco ISE, Release 1.1.1 with patch 3 applied. For specific instructions on performing the upgrade procedure, see the Cisco Identity Services Engine Upgrade Guide, Release 1.1.x.
HTH
02-03-2013 12:00 AM
Mikael,
Thanks for reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide