ISE Upgrade Fails from 1.1.0 to 1.1.2.145

[navdeep_singh]

Hi,

I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.

DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1

Save the current ADE-OS running configuration? (yes/no) [yes] ?

Generating configuration...

Saved the ADE-OS running configuration to startup successfully

Initiating Application Upgrade...

Stopping ISE application before upgrade...

Running ISE Database upgrade...

% Application upgrade failed. Please check logs for more details.

Regards

[Mikael Gustafsson · Accepted solution]

Hi,

Try to go to v1.1.1 first, add patch 3 and then go to v1.1.2.

From ISE relaese notes:

Upgrade from Cisco ISE, Release 1.1.1 to release 1.1.2

Before you can upgrade to Cisco ISE, Release 1.1.2, you must first be sure you have upgraded your machine to Cisco ISE, Release 1.1.1 with patch 3 applied. For specific instructions on performing the upgrade procedure, see the Cisco Identity Services Engine Upgrade Guide, Release 1.1.x.

HTH

[navdeep_singh]

Mikael,

Thanks for reply.