07-25-2012 11:40 AM - edited 03-10-2019 07:20 PM
Greetings. I'm doing an eval with the demo version of ISE. The demo image is 1.0 and I'm attempting to upgrade to 1.1. I've got the appbundle file on the box but I can't find what "repository" I should reference to run the upgrade. It's not directly referenced in any of the documentation I've looked at.
application upgrade ise-appbundle-1.1.1.268.i386.tar.gz ???
Thanks.
Solved! Go to Solution.
07-25-2012 11:51 AM
If you put on localdisk on the box you can then create a repository on CLI as follows:
host/admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
host/admin(config)# repository local
host/admin(config-Repository)# url disk:
host/admin(config-Repository)# exit
host/admin(config)# exit
can then do
show repository local
and show see the file
then
application upgrade ise-appbundle-1.1.1.268.i386.tar.gz local
07-25-2012 11:51 AM
If you put on localdisk on the box you can then create a repository on CLI as follows:
host/admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
host/admin(config)# repository local
host/admin(config-Repository)# url disk:
host/admin(config-Repository)# exit
host/admin(config)# exit
can then do
show repository local
and show see the file
then
application upgrade ise-appbundle-1.1.1.268.i386.tar.gz local
07-25-2012 11:54 AM
Aw. Now I see how "repository" is used. Your suggestion worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide