06-18-2017 04:27 PM - edited 03-11-2019 12:47 AM
Hi,
I'm working with an ISE v2.2 as a radius server in order to authenticate connection for a remote access vpn from an ASA only with local users (no AD integration), I want this policy to match exactly the User Identity Group "VPN-USERS" that I've configured for those users but I'm not able to find in the Policy Configuration section any of the User Identity Groups that I manually have configured in my ISE.
User Identity Group:
I can't locate it in the Identity Source List from the Authentication section:
And I also can't locate it in the Authorization section, when I choose the IdentityGroup:Name value and the equals option, in the next part I can't find any Identity Group:
Any ideas?
Thanks in advanced.
Solved! Go to Solution.
06-18-2017 04:46 PM
I think you should be looking under the first Condition box after Rule Name (in Authz Policy). Any identity group (user or endpoint) is usually under there.
06-18-2017 04:46 PM
I think you should be looking under the first Condition box after Rule Name (in Authz Policy). Any identity group (user or endpoint) is usually under there.
06-18-2017 05:17 PM
Thanks alot!, there was the option and it is working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide