cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

811
Views
10
Helpful
1
Replies
masoodst123
Beginner

ISE V3 Smart Licensing

Hi Everyone,

 

Since cisco the only option for ISE v3 is smart licensing, I have question about how often do I have to connect my ISE server v3 to internet so it can update its licenses.

 

Regards

 

1 ACCEPTED SOLUTION

Accepted Solutions
Mohammed al Baqari
VIP Advisor

Hi,

Quoted from Cisco Live PPT.

If there is a failure sending the initial registration message the retry,
interval will be as follows: • Every 15 minutes for 4 hours. • Then every
hour until successful, or Smart License is disabled via CLI

By default the Licenses usage is valid for 90 days, and renewed every 30
days

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKARC-2034.pdf

If you are concerned about internet connection for ISE, use satellite
deployment.

**** please remember to rate useful posts

View solution in original post

1 REPLY 1
Mohammed al Baqari
VIP Advisor

Hi,

Quoted from Cisco Live PPT.

If there is a failure sending the initial registration message the retry,
interval will be as follows: • Every 15 minutes for 4 hours. • Then every
hour until successful, or Smart License is disabled via CLI

By default the Licenses usage is valid for 90 days, and renewed every 30
days

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKARC-2034.pdf

If you are concerned about internet connection for ISE, use satellite
deployment.

**** please remember to rate useful posts

View solution in original post

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel