07-11-2013 03:13 AM - edited 03-10-2019 08:38 PM
Hi,
I cant seem to get the Ipads to work properly.
Laptops have no issues.
I have used the iphone configuration utility to create a wireless profile, Emailed it to the Ipad, imported the profile.
It prompts for a username and password on import.
When trying to join the wireless network, i get a request for the wireless nextwork password.
On WLC I get
client authentication failure,
Reason:Unspecified ReasonCode: 1
Im going to keep digging, but if anyone knows how to do this and save me hours of trawling that would be great
07-11-2013 04:55 AM
OK,
I made some changes, and i get a new error
Reason:802.11 Association failed repeatedly. ReasonCode: 2
so a little more digging shows the WLC not passing the credentials onto the ISE.
IT passes the mac address in the username, and obviously fails on ISE
07-11-2013 11:44 AM
Hello. What's your SSID configuration ? and what's your IPAD configuration ?
07-12-2013 04:55 AM
Hi,
Ok, I managed to get it connected.
My issue is that even if i have the network advertised in my wifi->choose a network options on the ipad, i cannot connect to it.
I have to manually select other, enter the details, select the WPA2 and enter credentials. It then connects.
I have tried to role out profiles to the device, but it does not seem to have any effect at all. It does not try auto join nor does it allow joining via clicking on the wireless network directly.
This is obviously a problem if i have to roll this change out to +100 users.
Ideally, I would like to have the profile available which they can just install, and enter credentials.
Anyone got this working?
07-12-2013 08:39 AM
If you need to do mass configuration in you IPads you can try a MDM solution like Citrix XenMobile. If you have Cisco ISE you can also deploy two SSID, one SSID for the IPADs to autoprovision 802.1x and the other SSID is for production. But I find the MDM solution is simpler.
Please rate if this helps
07-14-2013 07:01 PM
It is happening with one IPAD only or you are facing this issue with each and every IPAD.
07-15-2013 12:25 AM
It is doing it on every single Ipad.
Once I manually enter the network details, it works 100%. But i cannot get it to auto join when using the apple profiles
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide