09-20-2017 01:59 AM
Hi Team,
We are working on an opportunity of cisco ISE in a multi vendor wired environment with most relevant non-cisco switch as Juniper EX2200 which has not been listed in the compatibility matrix for ISE. But as per the administration guide quote:
For advanced features such as Guest, BYOD, and Posture, the device needs to support RFC 5176, "Change of Authorization" (CoA) Support for these flows depends o the NAD's capabilities.
Attached is the snapshot for the support of CoA on the said platform, does that indicate that we can support all of the advanced flows? In that case the compatibility information can be updated for the said model?
Kindly advise.
Solved! Go to Solution.
09-20-2017 04:01 AM
The Juniper EX2200 has not been tested by the BU and is why it is not listed in the Compatibility Guide.
There has been a JuniperEX NAD Profile created and used successfully. The 3200 is listed in the 2.1 Guide and the 3300 from 2.2 and up. I would suggest testing it prior to deploying. The information is here:
Juniper EX Switches - NAD Profile
The bottom of the NAD Profile page shows the flow in which the Device Profile can be used. The screenshot in the link is from ISE 2.0, here it is in ISE 2.3:
09-20-2017 04:01 AM
The Juniper EX2200 has not been tested by the BU and is why it is not listed in the Compatibility Guide.
There has been a JuniperEX NAD Profile created and used successfully. The 3200 is listed in the 2.1 Guide and the 3300 from 2.2 and up. I would suggest testing it prior to deploying. The information is here:
Juniper EX Switches - NAD Profile
The bottom of the NAD Profile page shows the flow in which the Device Profile can be used. The screenshot in the link is from ISE 2.0, here it is in ISE 2.3:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide