05-21-2019 01:29 AM
Hello Guys,
I have a couple of WS-C4507R+E running in VSS mode, and I'm trying to upgrade the license for the standby peer, and I'm trying to find the best procedure to do this with the minimum service interruption.
My plan is to do a vss switchover redundancy force-switchover and upload the license through tftp and start the activation.
My question is:
1. Am I suggesting the right procedure
2. what will be license upgrade or activation procedure
Thanks in advance
below is device details:
================================
sho switch virtual
Executing the command on VSS member switch role = VSS Active, id = 1
Switch mode : Virtual Switch
Virtual switch domain number : 10
Local switch number : 1
Local switch operational role: Virtual Switch Active
Peer switch number : 2
Peer switch operational role : Virtual Switch Standby
Executing the command on VSS member switch role = VSS Standby, id = 2
Switch mode : Virtual Switch
Virtual switch domain number : 10
Local switch number : 2
Local switch operational role: Virtual Switch Standby
Peer switch number : 1
Peer switch operational role : Virtual Switch Active
====================
Show version
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.08.06.E RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 06:32 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: 15.0(1r)SG5
IQBGAGJA-RS01 uptime is 33 weeks, 2 days, 15 hours, 12 minutes
Uptime for this control processor is 26 weeks, 7 hours, 38 minutes
System returned to ROM by SSO Switchover
System restarted at 03:48:25 GMT Tue Nov 20 2018
System image file is "flash1:unknown"
Jawa Revision 7, Snowtrooper Revision 0x0.0x1C
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Information for 'WS-X45-SUP7-E'
License Level: entservices Type: Permanent Right-To-Use
Next reboot license Level: entservices
cisco WS-C4507R+E (MPC8572) processor (revision 10) with 2097152K bytes of physical memory.
Processor board ID xxxxxxxx
MPC8572 CPU at 1.5GHz, Supervisor 7
Last reset from Reload
7 Virtual Ethernet interfaces
168 Gigabit Ethernet interfaces
20 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Solved! Go to Solution.
05-21-2019 04:38 AM
05-21-2019 04:38 AM
05-22-2019 12:03 AM
Thanks,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide