01-17-2020 12:55 AM
Hi all,
I am trying to find a solution to logg all 801.1x and MAB events to a syslog Server.
Sometimes we have some Issues with NAC and I want to correlate ISE loggs with loggs from the network device (WS-C3560CX).
When I start a "debug dot1x all", I can see all 802.1x messages and it would be nice, when I can logg this messages to our syslog too.
Many Thanks,
Chris
Solved! Go to Solution.
01-17-2020 03:52 AM
Hi
Have you tried the following logging commands to see if they log the information you want?
hth
Andy
• authentication logging verbose
• dot1x logging verbose
• mab logging verbose
01-17-2020 03:52 AM
Hi
Have you tried the following logging commands to see if they log the information you want?
hth
Andy
• authentication logging verbose
• dot1x logging verbose
• mab logging verbose
01-20-2020 12:02 AM
Hi,
many thanks for Reply! It works fine!
Best Regards
Chris
01-18-2020 06:28 PM
Please check the configuration guide of the IOS release for your switch on how to set syslog server logging level.
In our lab with Catalyst 3650 and IOS-XE 3.6.3E, the configuration command is "logging trap debugging" to send all debug messages to syslog servers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide