Monitoring Cisco ACS 1121 via SNMP

[Sami Abunasser]

Hi,

I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are  healthy.

Any one know if that can be configured? I figured i'd ask here before opening a TAC.

Thank you,

Sami

[Tarik Admani]

Sami,

Yes you can monitor ACS using snmp -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/viewer_sys_ops.html#wp1059341

Here are the mibs that ACS supports:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/device_support/sdt53.html#wp71020

Thanks,

Tarik Admani
*Please rate helpful posts*

[Eduardo Aliaga]

You can configure SNMP by using CLI. Please see the following link.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/command/reference/cli_app_a.html#wpmkr1896135

Hope it helps